config_example_avr_legacy_standardplus_mode.h

/* Configuration example
 
This example is targetted at the AVR platform (Arduino Uno & friends), only!
 
The configuration formerly known as STANDARD_PLUS is still the default on AVR, so you
do not need to configure anything! This file just lists the relevant settings involved: */
 
#include "MozziConfigValues.h"                       // for named option values
 
// all of these are the defaults on AVR, anyway, thus commented
//#define MOZZI_AUDIO_MODE MOZZI_OUTPUT_MODE_PWM
//#define MOZZI_AUDIO_RATE 16384
//#define MOZZI_PWM_RATE 32768
 
 
// should you wish to customize the output pin:
//#define AUDIO_AUDIO_PIN_1 TIMER1_A_PIN
//#define MOZZI_AUDIO_PIN_1_REGISTER OCR1A   // must also specify the hardware register responsible for this pin